MICROSET 101 FLUID REPLICATING COMPOUNDS

Microset 101 Fluid Compounds are high resolution, two part silicone polymers designed for replication of metal surfaces. The free-flowing nature of these compounds minimises the risk of air entrapment in the replica, and makes them easy to apply over large areas. They are suitable for replicating rough surfaces, cavities, tubes, threaded holes etc.
Technical Specifications:
  • Resolution: 0.1 microns
  • Shelf Life: 24 months
  • Cured hardness: 28-30 Shore A
  • Shrinkage: Less than 0.1%
  • Colour: Black or Grey
  • Useable temperature range: -10C to +180C
  • Specific Gravity: 1.1g/cm3
  • Linear Expansion Coefficient: 280 x 10-6 / °C
  • Packaging: Twin pack cartridge in three sizes – 50ml, 265ml, 495ml

 

Microset
Grade		 *Working
Life 25C
(mins)		 *Cure
Time 25C*
(mins)		 Key Features Typical Applications
101RF 0.5 5 General purpose fast curing fluid material Replication of horizontal or sloping surfaces. Use in low temperature conditions or where rapid results are required.
101FF 4 30 General purpose fluid material Replication of horizontal or sloping surfaces. Use in normal or high temperature conditions.
101XF 15 60 Specialist purpose fluid material Replication of horizontal or sloping surfaces.
101FS 50 210 Specialist purpose fluid material Replication of horizontal or sloping surfaces.

 

*Working life and curing times vary with temperature – higher temperatures decrease working life and cure, lower temperatures increase working life and cure.

*Quoted times may vary up to +/- 15% between batches