MICROSET 101 THIXOTROPIC REPLICATING COMPOUNDS

Microset 101 Thixotropic Compounds are high resolution, two part silicone polymers designed for replication of metal surfaces. The thixotropic nature of these compounds allows them to be applied on vertical and overhead surfaces without the compound dripping or flowing away from the area of interest
Technical Specification:
  • Resolution: 0.1 microns
  • Shelf Life: 15 months
  • Cured hardness: 28-30 Shore A
  • Shrinkage: Less than 0.1%
  • Colour: Black or Grey
  • Useable temperature range: -10C to +180C
  • Specific Gravity: 1.1g/cm3
  • Linear Expansion Coefficient: 280 x 10-6 / °C
  • Packaging: Twin pack cartridge in three sizes – 50ml, 265ml, 495ml

 

Microset
Grade		 *Working
Life 25C
(mins)		 *Cure
Time 25C
(mins)		 Key Features Typical Applications
101RT 0.5 5 Fast curing thixotropic material Replication of vertical or overhead surfaces. Use in low temperature conditions or where rapid results are required.
101TH 3 20 General purpose thixotropic material Replication of vertical or overhead surfaces. Use in normal or high temperature conditions.
101THS 7 30 Specialist purpose thixotropic material Replication of vertical or overhead surfaces.
101XFT 15 60 Specialist purpose thixotropic material Replication of vertical or overhead surfaces.

 

*Working life and curing times vary with temperature – higher temperatures decrease working life and cure, lower temperatures increase working life and cure

*Quoted times may vary up to +/- 15% between batches